Sculpt Surfboards Two Step logoSculpt Surfboards Boxer LogoSculpt Surfboards Shorty LogoSculpt Surfboards Trunk Junk LogoSculpt Surfboards Cheese Burger LogoSculpt Surfboards Junior Burger LogoSculpt Surfboards Thumpster LogoSculpt Surfboards Donut Dagger LogoSculpt Surfboards Throwback LogoSculpt Surfboards Couch Surfer LogoSculpt Surfboards Bowl Pole LogoSculpt Surfboards Cruiser Logo
Sculpt Surfboards Two Step Board

The most popular Sculpt craft is the Two Step, a great small wave short board. Fun in good, powerful waves but it speeds through the slower fatter sections featuring the wider outline, boxier rail and fuller foil to provide the performance you love in the small stuff. Great for the Sydney beaches and essential in any quiver all year round.

Key features: Fuller foil, single, double, V-double concave. Recommend thumb tail.
Best conditions: 0.5/4ft beach breaks

Sculpt Surfboards Boxer Board

The boxer is our new all-round performer, developed over the last six months with team rider Teale Vanner. This model is their go-to board for everything from waste high beach breaks to over head Indonesian reefs. Its outline and rocker are both continuous curves that give the surfer a nice predictable feel, drive and flow. With a little extra double concave in the fin area offering speed and control, the boxer offers it all; Speed, Control and Flow.

Sculpt Surfboards Shorty Board

The Sculpt Shorty is the all round short board perfect for hollow reefs, powerful point breaks, fun beachies and sick pits. Featuring a modern flowing outline and rocker matched with a responsive rail shape for speed and control.

Key features: Clean flowing outline, single flowing nose to tail rocker, single concave to moderate V tail. Best conditions: All awesome short board waves, you know what they are.

Sculpt Surfboards Trunk Junk Board

With the release of our new SB Boxer all-rounder, we decided to revamp an old favourite - the Trunk Junk. We shaved 1 1/4 inches off the length, filled out the foil through the nose a little, and extended the nose rocker to curve away from the front foot area to increase performance and paddling. the other major change is in the tail, where we added a smaller flyer or "bump" instead of a hip to accentuate the pivot point. This then tapers into a soft diamond tail for a nice balance of forgiveness vs. control.

Best Conditions: Beach breaks 2/6ft.

Sculpt Surfboards Cheese Burger Board

The Cheese Burger is our latest summer shred weapon. We’ve taken the forgiving and flowing characteristics of the THRWBCK and spliced them with the performance of the Two Step to create a high performance hybrid shortboard/semi-fish. The result is a board that can be pushed hard even when the waves are lacklustre, but can still be taken to some head high bowling conditions with aggression.

Key Features: Medium entry/exit rocker, Cut out hoof tail & Tail channels.
Best Conditions: 1-6 ft Versatile in punchy waves.

Sculpt Surfboards Junior Burger Board

The 2016 Jnr Burger is the spin off from our new adult model SB boxer especially deigned for the groms. Working with Alysse Cooper the Super Grom, we have fine tuned this allrounder for light weight surfers. Her results in competition lately on this model have been great so we are stoked to release it to the public.

Available in PE or stringer-less eps epoxy construction.

Sculpt Surfboards Thumpster Board

Sculpt's Thumpster 2016 is the super charged grommet step up board that projects the lightweight rippers into wave conditions they love to learn to progress on. Based on the adult Shorty but specifically designed to be perfectly balanced, easy to turn, and easy to develop skills for future wave stars. Thanks to feedback from Sculpt Surfboard's team rider Alysse Cooper, groms get more waves, execute heat winning turns and have more fun! Now available with Sculpt Pop Strip technology.

Key Features: Performance outline and rocker, perfect grom step up.
Best Conditions: 2ft/6ft beach, reef and point breaks.

Sculpt Surfboards Donut Dagger Board

The Donut Dagger twin is the latest reincarnation of one of our favourites. We've adapted it to be a specialised high performance twin fin with a trailer fin option. The outline is almost unchanged with a side cut outline and the only adjustment is the flyer moved back behind the side fins. Now a twin fin position further back in the board with deep double channels exiting the tail for extra bite. We lowered the racker and filled the foil for better flow in turns. The deck is quite flat with turned down rail for carving. Recommend swallow tail for the balance of planing area and bite. Ride 2 litres more than your short board and 2/3 inches shorter. Extremely versatile in 1/6 ft waves of all conditions.

Key features: Side cut in outline, flyers, and a touch longer and narrower.
Best Conditions: All 1/6ft waves.

Sculpt Surfboards Throwback Board

Sculpt's THRWBCK is a super fun semi-fish with a flat rocker and wide outline into a wide short board tail, allowing high performance surfing in ultra mush up too peeling point break. The THRWBCK features a prominent hip at the side fins and finishes into a wide-rounded square tail for plenty of control and liveliness, like an awesome 80’s dance floor. It's wide outline and full foil makes it paddle like a dream. Versatile and fun for all skill levels. Highly recommend X Core Reactor and five-fin box combo to suit the best high performance fin sets.

Key features: Flat rocker, rolled entry and wide outline. Best conditions: Sloppy beach breaks from knee high to overhead peelers.

Sculpt Surfboards Couch Surfer Board

The Couch Surfer is a retro style fish with a classic low rocker and full foil, perfect for those days when you want plenty of foam under your feet.
The Couch surfer features something a little different with a rolled vee through the nose into a mild single concave under the front foot finishing with a V tail for easy moves and soul turns. Ride the Sculpt Couch Surfer as a twinnie or a quad set for best results.

Key features: Rolled v entry, mild single, V concave. Wide swallow tail. Best conditions: Great from sloppy 1ft to 4ft point break.

Sculpt Surfboards Bowl Pole Board

The Sculpt BOWL POLE is a one board quiver. It’s a light, compact, versatile board to travel the world’s oceans and perform great across almost any conditions. Featuring a medium entry rocker, rounded pin, extra volume under the front and rear foot and a slight double concave on the deck under the rear foot removing unnecessary volume under the toe and heal to increase control.

Key features: Double concave deck at tail, deep single concave under front foot to generate speed.
Best conditions: 1-6 ft Versatile in punchy waves.

Sculpt Surfboards Cruiser Board

The Sculpt Cruiser is a super fun single fin allowing easy rides with the full volume and flat rocker, making this board great to paddle and perform flowing turns on waves.
Usually ridden as a single fin, with extra options to ride as a quad or “two plus one set up” which adds extra control to the craft.
A great board to fall in love with offering easy surfing for those flat days when you need some extra foam underneath your feet and carving arcs and turns with single fin simplicity.

Key features: Single/Quad/2 + 1 fin set-up, Easy paddling, great mini mal alternative Best conditions: All conditions up to 5ft.

Sculpt Surfboards S-Lab logo

Sculpt Surfboards Volume Calculator

Estimate your ideal volume. The more accurate your information,
the better the result so take some time reading the guides.



Paddle Strength

Board Type

Wave Height



Volume: 0L

Recommended Board

Sculpt Surfboards order now icon
* Every surfer has a unique style and volume preference so these recomended board sizes and volumes should only be used as a guide. If you want more information, send us an email or give us a call.

Sydney-sider & Freshwater local Nick Miles has been shaping and specialising in progressive board construction for almost a decade. Under the flag Sculpt Surfboards Nick continues to push board performance and durability.

Mechanically minded Nick questions surfboard construction techniques, uniquely utilising carbon to produce practical flex patterns and performance improvements with his creation X-Core Reactor technology (patented).

Working closely with a diverse crew of team riders means Nick is able to refine all our models for all types of surfers. This rigorous R&D program was created to offer customers the best shapes possible.

Team riders:
Teale Vanner, Nick Butler, Cooper Williams and Alysse Cooper.

Sculpt Surfboards are stoked with the power and performance of the new stringer constructions by X Core which is why you can now customise every Sculpt Surfboard to incorporate the X Core Reactor!

Find out more about the X Core Reactor.


Phone: 0404 338 463
Address: 9b/106 Old Pittwater Rd, Brookvale NSW

Sculpt Surfboards Logo